Professional SMT machines
and parts supplier

The used Samsung pick and place machine is one of the key equipment of SMT equipment, because its high efficiency and stable performance bring great advantages to our production. With the pick and place? machine, the production efficiency can be greatly improved. Mounter can provide high-quality products to customers, so the role of the mounter is irreplaceable. First, we must understand the comm

Yamaha SMT? Feeder? FEEDER is an important part of the SMT production line. Its quality is directly related to the achievement of the production plan and quality goals. There are some quetions: 1.Unrolled Mainly due to the slipping of the one-way bearing inside the large reel, personally think that it is a design defect. The three steel balls inside it are easy to wear, and the new one-way bearin

Typical case of smt pick and place machine application. With the development of the SMT industry, the application of the smt pick and place machine has also been continuously developed. Automatic pick and place machine, high-speed pick and place machine began to occupy the new smt machine market. High-speed placement machine: The automatic pick and place machine is a device for automatically and a

How to troubleshoot common faults in high-speed pick and place machines? such as?Used SMT Samsung SM310 pick and place machine, Juki pick and place machine and Yamaha pick and place machine. The high-speed pick and place machine error components are taken out from the packaging tape by the high-speed moving patch head. During the process of mounting on the printed board, there are several failures

Today, I will? Analysis pick and place?machine failure First, the smt pick and place?machine component placement offset, mainly refers to the component placement on the PCB, the position shift in X-Y, the reasons for its occurrence are as follows: 1. the reason for the PCB board a: The bending of the PCB is beyond the allowable range of the device. The upturn is up to 1.2MM and the downturn is up

SMT machine can't pick up components normally: 1. The tape size does not match the feeder specifications. 2. The vacuum pump doesn't work or the suction pressure of the nozzle is too low. 3. The plastic hot pressing belt that is taped at the picking position is not peeled off, and the plastic hot pressing belt is not pulled up normally. 4. The vertical movement system of the nozzle is slow. 5. The